Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

By Eddy

Hamish had a frustrating experience with a Nikon L35-AF.  His excellent review spurred me to write a few notes on some simple but sometimes effective things to try if you find yourself with a less-than-‘top-notch’ Pikaichi.  Some of these things might apply to other compact cameras as well. And as with most compacts, if you’re having problems with your shutter or motor the chances are you’ll have to open the camera up for prodding/adjusting/cleaning etc. but do give these simple things a try first…  

Fight the power

A stuck or unreliable shutter could be caused by any number of mechanical or electronic problems, especially if there’s any evidence of past moisture damage, but it is worth a quick check of the battery contacts first.  Most of the original L35s are very persnickety about power supply.  Seriously, even a little barely visible corrosion on the battery contacts or any variance in the voltage from cheap or rechargeable batteries that wouldn’t affect most cameras is enough to make it grumpy.   I’ve seen a few dead or semi dead L35s, including a couple of Ebay “spares or repair” bargains come back to life just by scrubbing and scraping the contacts with vinegar and using Duracell AAs. It’s possible that Nikon didn’t fit a proper voltage regulator, maybe they didn’t have the technical experience or opportunity to field test before release. My guess is they knew there was an issue though because the manual has an atypically specific section on battery selection.   Either way later models seem much more forgiving.

Rubbing the battery contacts with vinegar
Rubbing the battery contacts with vinegar

The battery door is a bit flimsy on most plastic-bodied cameras from the 1980s and the L35 is no exception – if your shutter is temperamental even with new and powerful alkaline batteries try pressing on the battery door and retesting – if that makes a difference either shim the batteries with a bit of folded tinfoil or build up the contacts themselves with a few drops of solder .

Adding a dot of solder to the battery contact
Adding a dot of solder to the battery contact

Don’t leave me this way

L35s are also a very sociable camera, they hate dark cupboards.  More than Canons, Olys or Ricoh’s of the same vintage I think. This might be because they use more metal components than most and so are more prone to seizure after years of inactivity.

A Nikon L35AF warming up under a halogen light
A Nikon L35AF warming up under a halogen light

Whatever the reason, fixing slow wind-on motors, a failure to wind beyond a particular frame or a completely stuck shutter usually means opening them up and googling for detailed repair instructions but I did get one “will it/won’t it” shutter going by repeatedly sitting it near a radiator or under a bright hot halogen lamp for a few hours then shaking it then putting it in the fridge and reshaking, shooting the shutter a few times between each cycle. The theory being that the temperature change is just enough to slightly expand and contract the components to release microscopic grubbiness. Or might just have been luck.  In fact – just give it a fire and shake whatever – nothing to lose (as long as you’re sensible about the vigour of your oscillations).   Once they’re going they usually stay going as long as they see the light every now and then.

Flashdance

Less typically (ie. once in my experience) a dodgy connection between the flash and the rest of the circuitry caused an erratic shutter.  This led the camera to think the flash was up but didn’t actually engage the flash charger so locked down the shutter.  Easy to fix but does mean dismantling and being very careful around the flash capacitor.  Pressing down (very) hard on the flash for every shot worked (and gave me a hint about root cause) but was a total pain.  More generally if you have the flash up it always wants to fire and won’t let you shoot till it’s charged.  That can feel like a problem if you’re used to cameras that fire but at slow speed if there’s no flash charge and is another reason to get good alkaline batteries.

There are lots of more serious reasons why things might go wrong but it’s definitely worth checking the above (especially the battery bits) before opening or giving up on an L35AF.

And if you do decide that you need to open one up make sure you pause to admire the innards. The L35AF is a very beautifully built camera.

Inside a Nikon L35AF

Share this post:

Find more similar content on 35mmc

Use the tags below to search for more posts on related topics:

Contribute to 35mmc for an ad-free experience.

There are two ways to contribute to 35mmc and experience it without the adverts:

Paid Subscription – £2.99 per month and you’ll never see an advert again! (Free 3-day trial).

Subscribe here.

Content contributor – become a part of the world’s biggest film and alternative photography community blog. All our Contributors have an ad-free experience for life.

Sign up here.

About The Author

By Eddy
My name is Eddy. I live and work in Oxford in the south east of England. I'm an enthusiastic amateur photographer with a particular love of analogue cameras from down the ages. My Instagram handle is @expectgrain and I'm always on the lookout for new people to follow and talk to.
View Profile

Comments

Martin Black on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 03/02/2021

Hello! Quick question for you. How does the shutter button come off when disassembling the camera? I'm having trouble with the motor and I wanted to take a look, but I can't open it past the L frame that houses the flash capacitor and count wheel.

The motor does just fine when I'm taking photos, however when the roll is finished and I try to rewind it can only muster rewinding a few frames. When I shake it I usually get a few more, but never more than a quarter of the roll gets rewound.

Thanks!
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Opie Jessicaa on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 03/05/2018

Wonderful article. Glad that i came across one…
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

David on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 20/06/2017

Just in case someone else is fiddling with a stuck rewind button. My L35AF had a lot of corrosion around the area where the rewind mechanism is located, so it got stuck. I fixed this problem by cleaning it and greasing it lightly. Works fine now!
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Hamish Gill replied:

Comment posted: 20/06/2017

Thanks for that!!

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Sonia Jackson on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 22/03/2017

Thanks for the post eddie. Rubbing the battery with vinegar really worked.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Albert Jones on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 20/03/2017

Wonderful article. Glad that i came across one...
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Popsy on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 23/06/2016

Hi Eddy, I got the younger brother L35AD 2 from a flea market a month ago. All seems normal, but the viewfinder bit foggy inside. Since it's viewfinder similar to the older bro, Is there any way to clean it? Or should it safe to follow your way? Any manuals or guide recomended.. Thanks in advance.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Fred replied:

Comment posted: 23/06/2016

Looking forward on how to clean a foggy viewfinder too!

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Stuart Lloyd replied:

Comment posted: 23/06/2016

Hi Fred, did you manage to clean your viewfinder? I've recently acquired an L35AF with the same issue, very clean otherwise.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Daniel F on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 10/02/2016

Be careful opening electronics. Sometimes there's a built-in battery that can give quite a shock.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Wyatt Maurer on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 10/02/2016

Wonderful article. I've got an as is ebay L35AF that is a little wonky that I'm going to try these repairs on. I was wondering what is involved in fixing the "dodgy connection between the flash and the rest of the circuitry" you mention in the article? Does it just involve carefully resoldering it?
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Eddy replied:

Comment posted: 10/02/2016

Cheers Wyatt. In my case it was corrosion all over the place under the flash itself and around the electrical connections. I cleaned it out with zippo lighter fluid rubbing with a very small file. From memory there were a couple of extra screws and some protective tape to lift around the flash to get at the right place. It was unscientific trial and error and on a beater of a camera that was more or less unusable - probably wouldn't have done it otherwise. But please bear in mind what Daniel says about safety - there can be a high voltage and very dangerous charge from the flash capacitor. I risked it because the camera had been sitting unused and uncharged for a long time and because I'm a fool. If you've had life out of your flash recently be extra careful (fire flash first then immediately remove batteries, use non-conductive tools or google 'discharge capacitor' for more knowledgeable advice - I'm a mere hacker and bodger. Cheers again and I hope you have some luck with your camera. What are the problems you're experiencing?

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Wyatt Maurer replied:

Comment posted: 10/02/2016

Hey Eddy, thanks for the advice. The two issues I seem to be having with the L35AF are that it will pop the flash up when focusing regardless of whether or not the exposure calls for it and then refuse to press the rest of the way down and take the photo. The only way to get it to fully depress and take a shot is if you hold the flash down and press it. It usually only does this for the first shot after you turn it on. The second issue is that sometimes after taking the photo, the camera won't advance the reel and I'll have to take the batteries out for a bit then put them back in for it to finally advance.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Micheál Rowsome replied:

Comment posted: 10/02/2016

wow, Thanks for this comment. Was feeling upset to find that the camera wasn't loading the film and there wasn't even an advance after the shutter was released. I opened up the battery compartment and allowed the battery to come out slightly and put it back in a gain... and hey-presto! It loads the film and winds on after a photo. The flash also pops up when it's needed. A funny old camera. Looking forward to seeing the results. Thanks again

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Eddy on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 10/02/2016

Hee hee :) I used this guide when I opened my first one:
http://theshuttergoesclick.blogspot.co.uk/2014/03/nikon-l35af-shutter-release-and-onoff.html

There is another guide online somewhere with scans of a repair manual and loads of detail about dismantling individual parts. Will post here if I remember the site name or have a link saved somewhere.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Hamish Gill replied:

Comment posted: 10/02/2016

Perfection! Saves you a job!

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Joseph replied:

Comment posted: 10/02/2016

Nice write-up and thank you for sharing this link. I picked up a filthy L35AF (iso 1000 version) at a car boot sale this morning for £2. To my amazement it works, but the viewfinder needed a really good clean. This link really helped. I'm pretty excited. Useful focus confirmation, a filter thread and manual iso rating mean this will probably be my 'nightlife' camera with pushed Kentmere 400.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Hamish Gill on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 10/02/2016

So Eddy, you might have opened a can of worms...
I was just asked on facebook for a guide to opening the camera up to get inside ... :)
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Eddy on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 10/02/2016

Thanks Frank and yes, it is a noisy one. Not quite as bad as the Canon AF35 Autoboys from the same era - they're like Godzilla cutting up Tokyo with a giant angle grinder then cackling about it. At least the wind motor on the Nikon doesn't run until *after* you've released the button. I'm not a big stealth photographer but on the odd occasion when noise would have broken the moment I've just held the button down and released under the table or away from my eye.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Frank Lehnen on Three simple, non-invasive things to try to repair dead or erratic Nikon L35AF – Guest post by Eddy

Comment posted: 10/02/2016

Thanks Eddy, this is a camera I'd always wanted to try out.... if only it wasn't so darn noisy.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Comment

Leave a Reply

Your email address will not be published. Required fields are marked *