Pentax KX – Mechanical Mastery, The Smoke, Sounds, and Nostalgia – By Jarrod Sams

By Jarrod Sams

Smoke fills the crisp morning summer air. The thundering sounds of steam locomotion shake the ground. The clanking and creaking of railroad cars rolling up to the depot. The light clacking of my camera capturing moments. I had decided to pack my Pentax KX, a Tamron 24mm f/2.5, a Pentax-M 50mm f/2, and a Tamron 28–200mm f/3.8–5.6 XR zoom.

Western Maryland No. 6 waiting at the Cass Depot. Number 6 is the second largest Shay type locomotive ever produced and the last of its type produced by Lima Locomotive Works. “Big Six”, as it is affectionately nick-named, frequently makes the long haul up to Bald Knob.

I took a trip back in the summer of 2014 out to the Cass Scenic Railroad in historic Cass, West Virginia. For railroad fans like myself, the Cass Scenic railroad hosts the largest roster of geared type steam locomotives in operation in the United States. What began life as a logging town in 1901, has become a popular destination for railroad enthusiasts, historians, and anyone that wishes to take in the beauty of nature. I decided to document this trip entirely on film. What better medium to capture and enjoy this excursion? The gear was much lighter and smaller to travel with than the digital gear I owned at the time, and the look of film was perfect to document such an area.

I chose this kit because it was simple. I didn’t want to worry about the batteries on a more modern film or digital camera (the KX being all mechanical but with a battery powered meter) and I wanted a reliable yet lightweight set-up to travel with. As you can see from the results, the meter on the Pentax KX is very good with consistent exposure. The camera, despite being fully manual, was quick to use with only a few exceptions that I will mention later.

The match-needle metering is quick to read and easy to visualize what settings you need at a glance. It allows you to over or under expose a shot on the fly without the need for an exposure compensation setting or adjusting the ASA value on the meter. A very simple system for beginners to learn and one that keeps the photographer attached to the moment and in total creative control of the image making process.

Pentax KX
Looking through the viewfinder of the KX, you see the meter scale on the right hand side. The black needle responds to light coming through the lens. The blue needle indicates the shutter speed that you have selected. To obtain a proper exposure, simply “match” the needles.

Focusing manually with the Pentax KX, as with most cameras designed for it, was a joy. The large and bright viewfinders of these cameras are rare to find in most modern cameras and go under-appreciated. The cross micro-prism focusing screen in my camera made focusing quick and easy. A split-prism focusing screen is also available and more common in most cameras that I have used. In practice, I prefer the micro-prism spot for most photographic situations. It is easy to see when your subject ‘pops’ into focus and can be better seen in low-light. A split-prism screen is nicer when photographing distant subjects and landscapes where that split allows you to set focus more accurately.

Pentax KX
Passing engine #5 on the switchbacks. This engine was making the routine run up to Whittaker Station. This trek is usually made two to three a times a day, compared to the trip I was on to Bald Knob that the railway only makes once a day.

I have owned and used the Pentax KX for quite a while now, but there are still a few hick-ups I have when using it. Features that sound like brilliant designs in marketing have created a few hurdles in having a streamlined user experience.

The first item is the meter switch. To activate the meter, you have to pull the film advance lever to the ‘pre-advance angle’ and press the shutter button half-way. This was a battery-saving feature and served as an on/off switch without the need for a separate switch for that purpose. Sounds like an ingenious design right? Problem is that I don’t normally shoot with the film advance pulled out unless I plan on firing off several frames in succession. This tripped me up several times when I would half-press the shutter and the meter didn’t respond. By the time that I realized that the advance lever wasn’t pulled out, the moment had passed and my shot was lost. A great design idea but unfortunately one that I struggled to grow accustomed to.

One positive note about how the meter operates is that you only have to press the shutter button half-way to activate the meter. You do not have to hold the button the entire time to obtain a meter reading. The meter will remain active until either the film advance lever is pushed in or the shutter lock switch is returned to the locked position. The meter even remains active after taking a photo and advancing the film (again assuming that you do not push the film advance lever closed). It is very nice to just hold the camera to frame and meter your shot. It can be tedious to have to hold down the button, especially when having to manual focus and stabilize heavy lenses.

Pentax KX
The film advance lever pulled out to its “pre-advance angle”.

The second item is the shutter lock. I am glad the Pentax KX has one because it can be tripped in a camera bag or if bumped the right way. However, I wish it had more of a shutter guard like the Olympus OM cameras or was more flush to the body to advert accidental activation. Being self conscious of hitting the shutter, I would keep it locked when not shooting. Problem was, like with the meter switch, I would frequently forget to unlock it. Combined with the meter switch, this would create a very frustrating situation when I needed to work quickly. Granted these should be things one would get used to when using the camera a lot. For some reason I struggled a lot more with adjusting to it than I thought I would. These two things became a wrench in the gears of my workflow with what is otherwise a classic piece of mechanical camera design.

Pentax KX
Top controls on the KX. See the red dot next to the shutter just under the “L”? It is the “Cocked Indicator”. When it is red, it means that the shutter is cocked and ready for the next photo.
Pentax KX
You can see how prominently the shutter button sticks up. Makes it very easy to find by feel, but without the shutter lock, it can be tripped accidentally.

Lastly one minor design item is the aperture display in the viewfinder. It’s a key reason why I wanted a Pentax KX because I like having as much shooting info visible at once. However, the display is located at the top of the viewfinder where I find it difficult to view and often even forget about it. I wish it were located in the lower portion where it could be viewed more efficiently like in the Minolta XD-11 for example.

All things considered, my gripes are really nit-picks and things that most would grow accustomed to with use. There are still a number of subtle design elements of the Pentax KX that can’t be appreciated until one uses this camera. The chamfered edges on the base-plate is one. A simple element to reduce sharp edges and make the camera more comfortable to hold. The KX features a depth-of-field preview button and mirror lock-up capability. Features that are frequently missing from budget film cameras and even many modern SLRs.

Pentax KX
Depth of field preview button and mirror lock-up control switch located on the front of the KX just above the self-timer lever. Very convenient to use and a feature reserved for the more professional models at the time.

While seemingly an eclectic mix, the lenses were selected to allow me to cover a myriad of situations. The Tamron zoom covers most photographic situations, except for low light. That is where the two primes step in. The 24mm helps with giving landscapes that vastness that I sometimes want to represent. And you can never go wrong with a ‘nift-fifty’. It should come as no surprise that the primes are sharp and and both are compact. The Pentax-M 50mm in particular is quite compact and a great general purpose optic on Pentax KX. The surprise is the Tamron zoom. Most professionals frown at the super-zooms. They aren’t technically as sharp as a dedicated lens of a given focal length, but I am reminded when I use this lens just how good of a lens it actually is. The majority of the images here were taken with the zoom. Also despite being an auto-focus lens, the zoom handled great on the KX and the short focus throw made quick focussing easy on a moving train.

At the end of the 4.5 hour train excursion to Bald Knob, I left that day with a jacket that smelled of soot, and rolls of memories that I will cherish forever. Images were photographed on Kodak Tri-X 400, Portra 400, and Portra 160 films. The film was developed and scanned by The Darkroom. The Pentax KX and kit of lenses I took served me well!

You can find another review of the Pentax KX on 35mmc here

Share this post:

Find more similar content on 35mmc

Use the tags below to search for more posts on related topics:

Contribute to 35mmc for an ad-free experience.

There are two ways to contribute to 35mmc and experience it without the adverts:

Paid Subscription – £2.99 per month and you’ll never see an advert again! (Free 3-day trial).

Subscribe here.

Content contributor – become a part of the world’s biggest film and alternative photography community blog. All our Contributors have an ad-free experience for life.

Sign up here.

About The Author

Comments

Micorette on Pentax KX – Mechanical Mastery, The Smoke, Sounds, and Nostalgia – By Jarrod Sams

Comment posted: 28/02/2023

The biggest flaw of this camera is H travel cloth shutter. Exept this it could be a perfect camera.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Jarrod Sams replied:

Comment posted: 28/02/2023

If only we lived in a perfect world :D I agree that I tend to prefer the vertical metal-blade shutter if given a choice. It would be nicer and also seen as more "pro" spec. But I have owned and seen many with the cloth horizontal shutters out-live others with a metal shutter unit for one reason or another. Only downsides would be those doing a lot work with flash. The high sync speeds that a vertical shutter can offer really open up the versatility of how you can work.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Kurt Ingham on Pentax KX – Mechanical Mastery, The Smoke, Sounds, and Nostalgia – By Jarrod Sams

Comment posted: 28/02/2023

Nice! At first I thought the headline referred to the camera. The KX wasn't THAT primitive!
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Jarrod Sams replied:

Comment posted: 28/02/2023

Hahaha! You are right. The KX, save for the more automated K2, was quite advanced for its time. In many respects it is still quite an advanced piece of engineering.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Don Goodman-Wilson on Pentax KX – Mechanical Mastery, The Smoke, Sounds, and Nostalgia – By Jarrod Sams

Comment posted: 27/02/2023

Lovely photos. I’d love to enjoy a Shay up close one day myself, as a fellow train nerd.

I will say as a long-time Pentaxian, the ergonomics you call out are, on reflections, movements that are second nature to me, and I now stumble over cameras that don’t behave in these idiosyncratic ways. For what it’s worth.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Jarrod Sams replied:

Comment posted: 27/02/2023

I agree that my ergonomic nit-picks are more haptics than anything and with more frequent use would, hopefully, resolve themself. The KX was the only camera that I had at that time that worked that way. I was just surprised how often I got myself tripped up when using it. I do think it makes more sense to tie the shutter lock and light meter switch together. But then if we all liked the same things then we wouldn't have variety would we? If you ever get the chance, I highly recommend the Cass Scenic Railway. The West Virginia landscape is simply beautiful and this town has loads of charm and historic value.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Michael J on Pentax KX – Mechanical Mastery, The Smoke, Sounds, and Nostalgia – By Jarrod Sams

Comment posted: 27/02/2023

I'm very fond of my Pentax MX which has the aperture display in the same place but the meter is switched on the shutter lock!
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Jarrod Sams replied:

Comment posted: 27/02/2023

Maybe I need to look at "upgrading" to the MX ;)

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Martin Siegel on Pentax KX – Mechanical Mastery, The Smoke, Sounds, and Nostalgia – By Jarrod Sams

Comment posted: 27/02/2023

Great story and pix, thanks for sharing.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Jarrod Sams replied:

Comment posted: 27/02/2023

Thank you for taking the time to read my post. I am happy that you enjoyed it!

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Bob Janes on Pentax KX – Mechanical Mastery, The Smoke, Sounds, and Nostalgia – By Jarrod Sams

Comment posted: 27/02/2023

Lovely camera - lots of styling carried over from the Spotmatic F - the pentaprism 'hump' is very different and it has a battery check button, but otherwise it is very similar, even down to the position of the screws. The bar against the shutter speeds in the veiwfinder is a nice touch.

Konica ended up doing something similar with the meter switch on their TC and T4, but they had the outer part of the lever sprung so that it poked against the face less. Cannot quite work out why Pentax didn't just integrate the shutter lock and meter switch -- after all it does switch off, but doesn't switch on...
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Jarrod Sams replied:

Comment posted: 27/02/2023

Upon further reading, it seems that using the film advance lever to activate the meter was a common practice at the time. Including its use on several Nikon models. Perhaps in an attempt to attract Nikon users to Pentax's new system, they too used this method for familiarity. Ironically I have a KR-5 super II (which is a redesigned Cosina CT-1 super) that also uses this pre-advance position to allow meter activation, however it also locks the shutter. While I still prefer to not have to use the camera with the advance lever pulled out, I don't stumble with using this camera. The main confusion, I think, is that the shutter button can still be depressed without activating the meter. It makes much more sense to have the shutter lock and meter switch be connected in some way. Maybe it's just my sense of logic (or lack there of depending haha). I still agree that these haptics can become second nature with more continued use.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Comment

Leave a Reply

Your email address will not be published. Required fields are marked *