Point & Shoot

The Nikon 310 Zoom – a Guest review by Andrew

Nikon 310 Zoom

One December evening I happened to be browsing and, wandering over to 35mmc, noticed that Hamish was very generously giving away a stack of compacts. The only catch was that a review was requested in return. So as a lucky recipient, here is my review for your consideration. My initial request was for a compact with a fixed focal length lens, but sadly everyone else had the same idea and I was too late, so I received a zoom instead – the Nikon 310 Zoom. Here’s the low down:


“Please, no photography for security reasons. Social security reasons.”

Nikon 310 Zoom Tech Specs:

  • 35-70mm Zoom, f3.5-6.5
  • Focus range from 0.6 m to infinity
  • DX coding 100, 200, 400 & 1000. Not sure how many 1000 rated films there are (or even were), so a little odd.
  • Yup, that’s about it, though of course it has AF, a motorwind, and a flash. You can focus lock depressing the shutter button halfway as you would expect. There’s an infinity focus lock, and an option for slow synch flash.
  • There is a 310QD version with panorama and data back, this is isn’t that version. Which is fine. Panorama mode just crops your 35mm frame, which you can do yourself with a full frame, and who wants dates embedded on their masterpieces? (not me.)

A show on the prom. In the wind.


Your usual Avocet on a pub decoration.

First impressions

A few things stand out about the Nikon 310 Zoom before a photo has even been taken:

Pro – The camera itself is reasonably good looking. It shouldn’t matter of course, but it does! It is also reasonably small too. There are smaller out there, but there are larger too. It’s relatively slimline and fits in a pocket with no fuss.

Con – This is not going to be a subtle street photography camera. It is noisy, it whirrs away when you zoom. As someone who has mostly used primes (35mm or 40mm, typically) for the last few years, I’m thinking of shooting this with the lens maintained on 35mm side of the range. I’m in familiar territory and it will keep noise to a minimum. Perhaps for testing purposes I’ll take the odd shot on 70mm.

Con – The flash settings are not retained when the camera is turned off and back on again. Hamish would want to know.

Loading up the day before…

I popped a film in and made my first mistake. I inserted Fomapan 400 which has no DX coding (but there is DX coding on Fomapan 100?). On a compact with next to no control, this is a slight issue; the instructions tell me the camera will default to iso 100. There is no way to tell the camera it has 400 in which is irritating. My plan is therefore to pull process the film myself, guesstimating a shorter dip in rodinal and relying on the legendary exposure latitude of negative film. I’m sure it will all work out. With film loaded, noisily, the sublime delights of the British seaside await…


I wish I could remember the name of the hills in the background…


Amazingly, the rain held off.

Test run

In use the Nikon 310 Zoom was ok, with a few quirks. The noise levels were not quite as distracting as I expected. In fact the size and innocuous looks of the camera offset the noise aspect and make this a rather subtle camera to use. I ended up quite enjoying the temptations of the Zoom too. As I mentioned earlier I have been using primes almost exclusively for a few years now. I’m worried I’ve been tempted to the dark side…

Possibly my only gripe is the shutter, a rubberised button offering little in the way of feedback. A few frames were taken inadvertently. On one occasion I found that I was pressing the zoom button which was already at maximum zoom, because those rubbery buttons just all feel alike. I also, of course, forgot to put the camera in resist-flash mode occasionally. Finally film completed, the motor wind made a pained effort to heave the film back into the canister and without delay I got my developing kit out of the cupboard.

The moment of truth…

Happy days, my pull process plan worked out just fine <mops brow>. The massive dev chart helped a little, 1+50 rodinal is 11 mins at 400, but it suggested 11 mins was also correct when rated at 200, which doesn’t seem quite right. Nothing was suggested for rating at 100, so you’ve heard it here first folks, 1+50 fomapan 400 rated at 100 is ok with a 9 min bath in Rodinal, with 10-15 seconds agitation every minute. Following scans with my Epson I-forget-the-number, and a little post-processing, the images you see in the review are the outputs. So, not too bad?


I don’t mind if you take my picture, he said. Of course you don’t, you have a mask on!?

So… Is it a keeper?

Ultimately the test of the camera is, are there any frames in here that I am happy with? Yes, there are. So that is a start. I would say that a few photos were overexposed, but with the chilled out approach of film, there was enough detail in there to save them. You may of course think that the over-exposure was a consequence of my iso shenanigans, but given the photo on the next frame was differently exposed, I think the problem is more fundamental, although of course I can’t rule out that perhaps it is just this copy that has an issue.

I also felt the frames were a little soft too, so the lens is not the best, but equally it didn’t seem to lose too much detail in the corners, so not the worst either. There are of course cameras I am happier with and that is going to the be issue for this Nikon, its ok, but we would all prefer a T3, Oly Mju, etc. So all told, I’m holding on to it, but I would say there are other options I will be reaching for first.


Exchange your telephones here.

Finally, thanks to Hamish for his generosity. I look forward to seeing some more of the reviews from the compact camera giveaway as I believe I am the first to submit a review. There were some good cameras handed out, so let’s hear about them please!

Show your support for 35mmc – A message from Hamish

If you found this post interesting or useful, or if it helped you make up your mind about buying one of these cameras, then why not

By clicking that link, as long as you buy, bid on or win an auction within 24hrs – at no extra cost to you – I will receive a little kick back from ebay to help keep 35mmc up and running.

Additionally, if you would like to contribute a post of your own to 35mmc, click here!



Do you enjoy reading 35mmc?

For as little as $1 a month, you can help support the upkeep of this website. The more people chuck me a small amount of cash each month, the more time I can spend building and improving upon it - simple as that!
Or, for $2 a month you can get access to my behind the scenes micro-blog over on Patreon!

Either way, want to help out, become a patron of 35mmc here:

Become a Patron!

Alternatively, if you just enjoyed this post, or like the odd post here and there, please feel free to chuck a few pennies in the tip jar via Ko fi here:

Write for 35mmc: read more here, about how you can help build upon this ever growing resource
Subscribe/Follow: click here, to discover all the ways you can follow 35mmc


You Might Also Like


  • Avatar
    Hamish Gill
    September 23, 2016 at 7:53 pm

    Thanks Andrew! Really good to hear about one of those cameras … 1 down, 15 to go!
    You got some crackers – that lens looks better than I expected!

  • Avatar
    Alex Hakimi
    September 26, 2016 at 12:14 am

    A great mini review. That first shot is rather brilliant. All of the images remind me of those from a Nikon 35Ti.

    I must say, Fomapan 400 develops very nicely in Rodinal. I’ve seen some images from Fomapan 200 Creative that really impressed me as well.

    Can any more of your work be found online?

    • Avatar
      September 26, 2016 at 6:27 am

      Thanks for your comments both.

      I’m not sure I am that keen on Fomapan 400 if I am honest. I bought a brick of it and am trying to get it used up! I found the grain to be a little too much, particularly when it is pushed, unlike HP5+. I have not tried the 200, but have used a brick of 100 and found that to be excellent – nice blacks and could be pushed to 400 very nicely. My next film purchase will be 100 again.

  • Avatar
    August 9, 2017 at 10:28 am


    I own one nikon 310 p&s cam. One con is the not shielded lens when the cam is not in action. My glass cover broke during carying in a bag and I discovered the glass just covers up the real lens inside. I found the shots on kodak tmax 400 I made with it so far not sharp enough. I popped out the broken glass cover and ring(it’s glued so easily removable with a pincet or small screwdriver) and repositioned the ring back with glue as the ring could act as a small lensshade. The life of the camera was rescued by this and it’s perfectly usable now. I’m currently back on BW400CN film with it and curious if the shots are sharper with the (mostly dirty) glass cover removed. I’ll keep you all informed.

  • Avatar
    D.W. Nickerson
    December 13, 2018 at 2:57 am

    Strangely enough the QD is not a back but integrated into the top and also gives the camera a boost in performance. From the manual:
    Zoom 310 : f/3.5-f/16 at 35mm setting, f/6.5-1/27 at 70mm setting
    Zoom 310 QD: f/3 5-f/22 at 35mm setting, f/6 5-f/41 at 70mm setting

    Zoom 310: ISO 100: EV7-15(W), EV8.5-15(T), ISO 400: EV9-15(W), EV9-16.5(T)
    Zoom 310 QD: ISO 100: EV5-17(W). EV6.5-17(T), ISO 400 EV7-17(W). EV7-18.5(T)

    Setting film speed to ISO 50 and ISO 1600 manually (Zoom 310 QD only)

    There is no numbers for shutter speeds only: Programmed electronic shutter; also serves as diaphragm blades.

    After seeing the boost in F stops and EV I bought a 310 QD awaiting its arrival.

    Oh the QD also looks better not that it matters.

  • Leave a Reply

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Pin It on Pinterest

    Share This

    Thank you for commenting

    ...now share the post with your friends?