Mamiya 135 EE

5 Frames taken with a Mamiya 135 in south-eastern Scania

By Jonas Ranstam

I was born in southern Scania, specifically in the town of Simrishamn on the Baltic Sea, grew up in the neighbouring municipality of Tomelilla and attended upper secondary school in Ystad, another small coastal town nearby. This area, located an hour from the metropolitan area of Copenhagen and Malmö, is served by the SiTY train — a humorous reference to the rural surroundings of Simrishamn, Tomelilla, and Ystad. Having completed a PhD at Lund University, I spent several years working in Lund, Malmö, Stockholm and Copenhagen before returning to Ystad, where I retired and renewed my interest in analogue cameras and film photography.

I recently bought a Mamiya 135 EE on an online auction site for around €30. Apart from the light seals being extremely sticky and the lens cap being missing, the camera seemed to be in excellent condition. The lens cap is necessary to avoid draining the exposure meter’s battery (I use LR44), as there is no switch to turn the meter off. I soon found a suitable replacement lens cap, however, and bought new light seals from Antikea Photo. Replacing the old ones was messy but not particularly difficult.

To test the camera, I loaded it with a roll of 32 exposures of Fomapan 400 film and went on a short road trip. I find standard 36-exposure films slightly too long and awkward to handle when developing the film. One advantage of bulk loading is that you can choose any length. As for Fomapan 400, I like the distinctive grain pattern and nostalgic character, which is further accentuated when developing the film with Rodinal.

Buildings to be demolished
Photo taken using a Mamiya 135 EE and Fomapan 400 developed using Rodinal 1+25

My first stop was the harbour in Ystad, which was a thriving place during the Middle Ages when the herring trade was at its most profitable. Smuggling between Ystad and Stralsund in Swedish Pomerania (now part of Germany) during Napoleon’s continental blockade was probably even more lucrative. This made Ystad a vital trade link with the UK, generating several major fortunes in the process. The renowned Swedish author August Strindberg famously described the town as a ‘smuggler’s and robber’s nest’. Today, Ystad is primarily a hub for ferry traffic between Sweden and Denmark, Poland, and Germany. Proud harbour buildings associated with agriculture and trade have been earmarked for demolition, but the neoclassical palaces, which were built using profits from smuggling, will be left intact.

Summer houses by the beach
Photo taken using a Mamiya 135 EE and Fomapan 400 developed using Rodinal 1+25

Löderups Strandbad is a seaside resort located 25 kilometres east of Ystad. In the 1960s, erosion increased significantly, destroying and threatening several houses. In an attempt to protect their properties, the owners reinforced the shorelines with truckloads of large stones, which made the beach an unpleasant place. What was once a wide, white, sandy beach filled with families sunbathing and swimming in the summer has become a place of lonely people, unwelcoming stone barriers and the foul smell of rotting seaweed.

The bathing jetty at Löderup Strandbad
Photo taken using a Mamiya 135 EE and Fomapan 400 developed using Rodinal 1+25

Further east, 12 kilometres south-southwest of Simrishamn, lies Skillinge, a village with origins dating back before the Viking Age. During the 19th century, it expanded from a small fishing community to become a harbour for one of Sweden’s largest sailing fleets, with 320 registered ships. However, the golden age of sailing soon came to an end when steamships rendered sailing ships obsolete. The last merchant ship registered in Skillinge was the Astrid. She departed her home port for the last time in 1976 and was later employed as a sail training ship, eventually sinking in the Irish Sea in 2013.

Fishing boats in need of renovation
Photo taken using a Mamiya 135 EE and Fomapan 400 developed using Rodinal 1+25

The harbour is less impressive today, but there is a renowned restaurant on the old main pier. If you’re looking for delicious fried plaice, it is worth a visit.

Skillinge Harbour Restaurant
Photo taken using a Mamiya 135 EE and Fomapan 400 developed using Rodinal 1+25

Share this post:

About The Author

By Jonas Ranstam
I have returned from digital photography to black-and-white photography with classic analogue cameras, bulk loading of film and developing in steel tanks.
Read More Articles From Jonas Ranstam

Find more similar content on 35mmc

Use the tags below to search for more posts on related topics:

Donate to the upkeep, or contribute to 35mmc for an ad-free experience.

There are two ways to contribute to 35mmc and experience it without the adverts:

Paid Subscription – £2.99 per month and you’ll never see an advert again! (Free 3-day trial).
If you think £2.99 a month is too little, then please subscribe and I can manually edit the subscription value for you – thank you very much in advance if this is what you would like to do!

Subscribe here.

Content contributor – become a part of the world’s biggest film and alternative photography community blog. All our Contributors have an ad-free experience for life.

Sign up here.

Make a donation – If you would simply like to support Hamish Gill and 35mmc financially, you can also do so via ko-fi

Donate to 35mmc here.

Comments

Charles Young on 5 Frames taken with a Mamiya 135 in south-eastern Scania

Comment posted: 25/10/2025

Jonas: Lucky you to find that Mamiya in good condition. It seems to be working out well to have a slightly wider angle lens. Nice photos to remind you of your favorite places! I like shorter loads of film too.

Hurrah for older rangefinder cameras!
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Jonas Ranstam replied:

Comment posted: 25/10/2025

Thank you for your kind comments. And yes, being able to select the length of the film is an important advantage of bulk loading. Lengthening the arms is much more challenging.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Walter Reumkens on 5 Frames taken with a Mamiya 135 in south-eastern Scania

Comment posted: 25/10/2025

This report reminds me of a holiday of several weeks in 1996 in a holiday home in Nybrostrand. Apart from Simrishamn and Lund, I got to know all the places mentioned. We were there by car, but I was only able to arrive a few days later due to work. We travelled by plane and speedboat from Germany via Copenhagen to Malmö. From there I travelled by train to Ystad, where I was picked up. A marvellous area, a wonderful time. Back then I took photos with the Nikon F4 and the Kodak Gold100. Maybe I should scan the negatives.

I really like your photos with the Mamiya 135 EE and they have brought back memories. I also have a soft spot for cameras from this period and am always pleasantly surprised by the results. No Mamiya but a Konica and Olympus. They are waiting to be used. Your photos provide an opportunity to realise this idea in the near future.

Thanks for the essay and the great photos, Jonas.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Jonas Ranstam replied:

Comment posted: 25/10/2025

Thank you very much indeed, Walter.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Stefan Wilde on 5 Frames taken with a Mamiya 135 in south-eastern Scania

Comment posted: 25/10/2025

Hi Jonas,

this must be the first time since - I forgot when - I read a piece with the town of Ystad in it and no mention of Kurt Wallander!

Anyway, a lovely set of pictures and interesting background information re this part of Scania. Thanks for sharing!
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Jonas Ranstam replied:

Comment posted: 25/10/2025

Thank you. Yes, Wallander takes up a lot of space in Ystad. There will be more filming next week, with extensive parking restrictions for local residents. I believe this is the fourth adaptation of the Wallander stories.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Gary Smith on 5 Frames taken with a Mamiya 135 in south-eastern Scania

Comment posted: 25/10/2025

A great set of photos Jonas! I have yet to use Rodinal despite many suggestions. My brush with Mamiya is documented here as is my trials with Fomapan 100. Thanks for your post!
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Jonas Ranstam replied:

Comment posted: 25/10/2025

Thank you, Gary.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Jeffery Luhn on 5 Frames taken with a Mamiya 135 in south-eastern Scania

Comment posted: 25/10/2025

Jonas,
Very nice photos! Your choice of Rodinal is really working well with those interesting scenes. Thanks for sharing.
Jeffery
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Jonas Ranstam replied:

Comment posted: 25/10/2025

Thank you, Jeffery.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Adrien Grelet on 5 Frames taken with a Mamiya 135 in south-eastern Scania

Comment posted: 25/10/2025

Nice article ! I've tested to develop pan 400 with rodinal too but I've experienced lot of grain, compared to D76. What is your revelation time ? Thank you !
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Jonas Ranstam replied:

Comment posted: 25/10/2025

Thank you, Adrien. I usually expose Fomapan 400 at 200 ASA and develop the film in one part Rodinal and 25 parts water for five and a half minutes at 20°C. Instead of using a stop bath, I rinse the film with water before fixing it in one part Fomafix and five parts water for three minutes. I don't see silver grain as a problem. Unlike digital noise, I like it. It's part of the look I'm trying to achieve.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Adrien Grelet replied:

Comment posted: 25/10/2025

Thank you for this information. I've tested about one minute more than you, maybe it's the issue. I'll try your time on my next film. Pan 400 is my everyday film since a while, even though price of a roll in France has increased since a year.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Leave a Comment

Leave a Reply

Your email address will not be published. Required fields are marked *