News & Events

NEWS: Reveni Labs Launches Spotmeter Kickstarter Campaign

February 11, 2021

Matt Bechberger, owner of Reveni Labs ran a very successful Kickstarter for a fantastically small light meter last year (you can read a review on it by Hamish here)

Smashing their target by 700% a tremendous amount of orders were made. Somehow though, he still delivered on schedule to all backers, a rare gem in the world of Kickstarter for sure. Back at it, Matt has designed the Reveni Labs Spotmeter and has brought the campaign to Kickstarter once again.

It’s not as small as the original Reveni meter but it’s still astonishingly small – especially for a Spotmeter! Those who have previously owned a Spotmeter will know that they can be pretty cumbersome, expensive & a lot of models are getting very old and are past their intended product lifecycle. Something not often thought about too is that generally, Spotmeters aren’t terribly user friendly and can be complex for the layman to just pick one up and use. The Reveni Spotmeter promises to solve these problems and at a very reasonable price point. The meter doesn’t actually have a passthrough viewfinder for you to view the scene with. Which I’ll admit, struck me a bit odd at first. But after reading on the Kickstarter page it actually makes quite a lot of sense. Utilizing the power of your brain collating both the data and the scene in your mind to create a virtual overlay of what’s going on. Pretty nifty. This in part allows the Spotmeter to be the small size it is.

 

Next to a Pentax V Spotmeter its positively minuscule - making more room for other things in your camera bag

Next to a Pentax V Spotmeter its positively minuscule – making more room for other things in your camera bag

 View of internal OLED display

Key Features

  • Spot metering (~1.5 degree) 6”(15cm) circle at 20ft(6m)
  • Bright internal OLED display
  • Innovative two-eye aiming method
  • Simple controls and menu
  • Single, 2-spot average and Precision Method metering modes
  • Aperture or Shutter priority modes
  • Exposure compensation in 1/3 stops (-2 to +2 stop range)
  • 2x Alkaline LR44 battery
  • Dimensions: 2.8″(71) L x 1.2″(30.5) W x 1.5″(38) H inches(mm)
  • Weight: ~35 grams (1.25 oz)
  • Enclosures, accessories, PCB population, packaging, assembly and shipping all in Canada. Some other components North America and globally sourced.

Technical Data

  • Shutter speed range: 1hr – 1/8000th sec in 1 stop increments
  • Aperture range – F0.7 – f1024 in 1 stop increments
  • Film ISO range – ISO 1 – ISO 12800, see “Setting Film ISO” for full list
  • EV Range – EV 2 to EV20 in 0.1EV increments (@ISO 100)
  • ISO range: 1, 3, 6, 12, 25, 50, 80, 100, 125, 160, 200, 250, 320, 400, 800, 1600, 3200, 6400, 12800

 

I’m happy to see the batteries needed remain LR44, the same as the previous lightmeter.  It sounds pretty trivial I know but some cameras and meters take the most obscure batteries which are always expensive and difficult to find unless shopping online.

At the time of writing, the funding has totally smashed goal but that doesn’t mean you shouldn’t back! It’s a great opportunity to support Reveni Labs and get yours sooner than the rest. And honestly, $225 CAD – approximately £130 is a bargain of a price to back this. As someone who wears glasses all the time props to Matt for making sure it works just as well for us too…

If you want to learn more you can check out the Kickstarter here. It’s got a lot more info on how it works including fancy diagrams, videos/GIFs of it in action, and testimonials from beta unit testers.

Support 35mmc

For as little as $1 a month, you can help support the upkeep of 35mmc via Patreon. Alternatively, please feel free to chuck a few pennies in the tip jar via Ko-fi:

Become a Patron!

Learn about where your money goes here.
Would like to write for 35mmc? Find out how here.

No Comments

    Leave a Reply

    This site uses Akismet to reduce spam. Learn how your comment data is processed.